Hours: Mon - Fri 8.00 - 5:00 pm CST
Closed Weekends & Holidays
Office: 420 Wagner Road
Porter, IN 46304

Flamex PF Fire Retardant

Rated 5.00 out of 5 based on 3 customer ratings
(3 customer reviews)


  • Laboratory tested in accordance with NFPA-701 on fabric.
  • Will not stain or change the color of fabrics.
  • Once cured for 48 hours, the treated material may be painted.
  • Price for 55-gallon drum includes shipping


Flamex PF fabric fire retardant penetrates the material and becomes part of its molecular structure. When the treated material is subjected to an open flame, Flamex PF fabric fire retardant will reduce the flame spread and self-extinguish the flame of most fabrics if treated properly. Flamex PF fabric fire retardant is non-toxic and non-hazardous to the environment and simple to apply.

Since Flamex PF fabric fire retardant penetrates and becomes part of the substrate, the life of the flame retardant is indefinite as long as fabrics are not wet washed, however, they may be dry cleaned up to two times without having to reapply. Flamex PF fabric fire retardant is not a coating instead it penetrates and becomes part of the substrate. This product will not alter the structural integrity of the substrate. Flamex PF is often chosen because it is non-toxic, dries clear, easy (spray, brush or roll) application. Once cured (8-12 hrs.)

Flamex PF is used for interior applications such as draperies, wall coverings, furniture, etc. This product is used widely in restaurants, schools, hotels, hospitals, homes and many other commercial and residential buildings.

Flamex PF fire retardant spray has been tested to the following standards: NFPA 255, UL 723 and NFPA 701

Flamex PF flame retardant spray can be applied as is by spraying or immersing. In order to be effective, the entire fabric must be saturated from one side through the other. If the material is thick, a heavier coat may be needed along with spraying both sides of the material. Since all fabrics have a different density a small test should be performed by the utilization of a small flame (butane lighter). Hold a piece of the treated material vertically and apply the flame to the lower portion for 5 – 10 seconds, remove the ignition source. The flame must go out within 2 – 3 seconds. (This test is similar to the small-scale NFPA 701 field test).

Do not dilute. Storage Range: 110 degrees F, to 45 degrees F. Shelf Life- 3 years kept within storage temperatures. A strong compatibility test is recommended.

Additional information

Weight N/A

5 Gallon Pail, 55 Gallon Drum, Gallon, Gallon Case, Quart, Quart Case

3 reviews for Flamex PF Fire Retardant

  1. Rated 5 out of 5

    Mike Burke

    Easy to use and treated the fabric as I expected. Practical . The bottle comes with a spray attachment

  2. Rated 5 out of 5


    We always use this product for our schools décor because we need a fire retardant with no odor.

  3. Rated 5 out of 5

    Janet Katz

    Tried it on a small piece of the same material as our curtains and tried to burn it. It would not sustain flame. 🙂

Only logged in customers who have purchased this product may leave a review.