Flamex PF Flame Retardant Spray For Fabric

Description

Flamex PF Flame Retardant Spray

from National Fireproofing Supply Co. penetrates fabrics deeply, becoming part of the molecular structure. Flame spread is reduced, and flames will often self-extinguish upon contact with the treated material. Flamex PF Fire Retardant Spray for fabric is also non-toxic and non-hazardous. This product is widely used in restaurants, schools, hotels, hospitals, homes and many other commercial and residential buildings.

Flamex PF fire retardant spray has no harmful fumes or nasty smells and it dries quickly and completely with no residue and without affecting the color of the treated material. This fire retardant spray is also long-lasting. It will last indefinitely as long as the fabric is not wet washed. Treated cloth and textiles may be dry cleaned up to two times without requiring re-application.

Basic Uses

Flamex PF Fire Retardant Spray for Fabrics can be used on all garments, draperies, upholstered seating and furniture, carpets, and all other textiles of all kinds. Spray application is recommended for larger areas, though rollers and brushes can also be used to apply the product to fabrics. Typical dry time for this product is 8-12 hours, depending on the temperature, moisture, and other conditions.

Applicable Standards

This fire retardant spray has been through extensive testing. It passes all of these applicable standards:

• NFPA 255 (Standard Method of Surface Burning)
• NFPA 701 (Flame Propagation Testing)
• UL 723 (Standard for Test of Surface Burning Characteristics)
• CA Title 19 (California Code of Regulations)

Application Instructions

This fire retardant spray for fabric can be applied through spraying or immersion. The entire fabric should be saturated. Thick materials may require a heavier coat and treating from both sides.

To test for proper application, use a small flame such as a butane lighter to apply heat to the material, while holding it vertically. Apply flame for 5-10 seconds. The flame should go out within 2-3 seconds.

This spray should not be diluted, as it will lose effectiveness. It has a shelf life of 3 years, and should not be stored in excess of 110 degrees F, or lower than 45 degrees F.

FAQs About Flamex PF

Q: Is Flamex PF durable?

A: No, Flamex PF provides long-lasting protection for your fabrics until they are wet washed once or dry cleaned more than twice

Q: Can I wash fabrics treated with Flamex PF?

A: No, if the treated fabric is washed, Flamex PF must be reapplied

Q: Is Flamex PF compatible with all types of fabrics?

A: No. Flamex PF is suitable for a wide range of porous and semi porous fabrics only, and it’s always best to test it on a small, inconspicuous area first to ensure compatibility. Cannot be used on 100% nylon, vinyl, and other non-porous fibers.

How to fireproof textiles?

1. Make sure that the material has been washed or vacuumed to remove dust.
2. Apply with and device that’s capable of spraying a thin liquid, or by completely immersing it.
3. When applying, start at the upper left corner and apply Flamex PF across from end to end.
4. Continue working your way down and across while overlapping each pass.
5. After treating one side of the material, confirm that the opposite side is damp.
6. If the first side did not penetrate through, repeat the application to the opposite side, especially on thicker material .
7. Eliminate any folds in order for air to dry the treatment thoroughly.
8. Do not use on fully synthetic / non-porous textiles

So there you have it! Flamex PF is your ultimate ally in the fight against fabric fires. With its powerful formula and easy application, you can protect your fabrics with ease and ensure their safety.

Additional Information:

Shelf life of up to 5 years when stored properly between 45-110° F. Leaves no nasty chemical odors Does not release harmful fumes Will not affect the color or appearance of the treated material Dries quickly without leaving any residue.  Meets applicable standards – NFPA 255, NFPA 701, UL 723, and CA Title 19 1237.1  Materials treated with Flamex PF are non-toxic to humans and animals.

Additional information