Description
Technical Downloads (click here)
Our Flamex PF-2 exterior wood retardant serves as a fire retardant spray penetrant that protects outdoor wood surfaces from fire and creates a waterproof barrier for roofing materials, decks, and siding applications.
Flamex PF-2 is an advanced flame retardant specifically formulated for exterior unfinished wood surfaces. It provides critical protection against common fire threats, including hot embers, coals, and electrical sparks, significantly reducing the risk of ignition. Protecting your wood deck from fire hazards is a critical safety factor every homeowner must consider. Fire safety in outdoor environments is becoming more important, especially in areas where threats in the form of wildfire embers are prevalent or in areas where cooking outdoors is common.
A single spark can immediately become a devastating fire threatening your property. Flamex PF-2 for exterior wood creates a barrier to lower the risk of fire due to the spreading of flames.
Why Choose Flamex PF-2?
Flamex PF-2 provides multiple key benefits: Class A fire protection, termite resistance, and UV protection. It also dries clear, maintaining the wood’s natural aesthetic while imparting powerful fire-resistant properties.
Treated surfaces breathe and do not trap moisture, providing excellent water repellency and UV protection. Effective on horizontal and vertical surfaces. Works on old and new wood surfaces. Excellent resistance to water intrusion and deep penetration into the substrate. Mildew and fungus resistant. Decks may be stained once the treatment has cured.
What can Flamex PF-2 be applied to?
- Wooden decks
- Exterior siding and trim
- Fence panels and posts
- Outdoor furniture
- Pergolas and gazebos
- Wood shingle roofs
- Roof sheathing
- Exterior thatch, mulch, and straw.
Key Components and Properties:
-
- Water-based solution with fire-inhibiting chemicals
- Non-toxic composition safe for residential use
- Clear-drying formula that preserves wood aesthetics
- UV-resistant properties for lasting protection
- Flame spread index ≤ 25
- Smoke development rating ≤ 70
- Passed rigorous ASTM E-84 testing standards
Why Should You Choose Lab Certified Products Like Flamex PF-2?
Opting for a lab certified product such as Flamex PF-2 guarantees investment in a solution that meets stringent standardized safety protocols. This certification ensures consistent, reliable fire protection across diverse applications and environmental conditions. Standardized testing also facilitates accurate product comparisons, empowering informed decisions for your exterior wood fire safety.
What does ASTM E-84 compliance mean for Flamex PF-2?
ASTM E-84 compliance refers to the fire performance testing standards that measure how building materials, including products like Flamex PF-2, perform in terms of flame spread and smoke development. Choosing a certified product ensures reliability during emergencies.
Was Flamex PF-2 tested for exterior use?
Yes, Flamex PF-2 was tested according to the ASTM D5401 “Water Repellent Wood Coating Testing” by Home Innovation Research Labs. Test Report # 4162-037-120815
How should I apply Flamex PF-2 on my wood?
Reapplication frequency for Flamex PF-2 depends on environmental factors. In high moisture/rain prone areas, more frequent reapplications may be necessary to maintain its effectiveness. Regular maintenance is essential to uphold fire protection over time.
How do I test wood for reapplication after three years?
What are the best practices for applying Flamex PF-2 effectively?
For optimal results, apply Flamex PF-2 at 125 sq ft per gallon. Always shake or mix thoroughly before use and never combine with other products. Prevent freezing. Store in its original container, shielded from direct sunlight and heat. Before full application, pretest for applicability and colorfastness. Ensure the wood surface is porous, clean, and completely dry.
After applying Flamex PF-2 and allowing a full 48-hour cure time, exterior wood surfaces can be stained with a water-based product. Clean all application tools and hands immediately with soap and warm water.
Apply Flamex PF-2 exclusively when air temperatures are 50°F or above, maintaining this temperature for at least 24 hours post-application. Crucially, do not introduce any tints or dyes. Protect treated areas from rain exposure for a minimum of 48 hours.
Burn Demo (Wood)
Burn Demo (Straw)
Burn Demo (Thatch)
Disclaimer: Use the product as directed. If the product is proven to be defective, sellers and manufacturers will only replace the defective quantity. Neither Seller nor Manufacturer is liable for any injury, loss, or damage, direct or consequential, from the use of the product. The user is solely responsible for any risks and liability associated with the product. Any additional statements or recommendations not included in this agreement are not valid unless signed by officers of the seller and manufacturer. Coatings applied to interior finishes may deteriorate
