Description
Technical Downloads
Flamex PF fabric fire-retardant coating is a chemical preparation designed for the treatment of various kinds of textile in order to make them less combustible and to stop rapid spreading of the flames. It has been devised for the bettering of the safety of fabrics and thereby for the efficiency of their ignition resistance with a view to lessening the number of fire accidents.
How Flamex PF Works
When the material is near a flame or some burning body, Flamex PF reacts to the increase of temperature and liberates chemicals which go into the igniting body and instantaneously extinguish the fire before it is enabled to extend further. The result of this is that those materials which are treated by Flamex PF are certain to conform to the highest standards of safety concerning the treatment of fabric and textiles in general.
Advantages Of Applying Flamex PF
Extra Safety: Flamex PF provides a greater margin of safety in respect of fabrics for there is less risk of any accidents due to fire. Compliance: Fabrics treated with Flamex PF will conform to necessary industrial safety standards and legislation in respect to flame-retardancy. Versatility: Flamex PF can be applied to the greatest variety of textile goods, such as garb, hangings and upholstery, consequently a solution for all uses. Permanent Safety: The fire-retardant quality will remain attached to the substrate after application.
By chemically treating these textiles with Flamex PF we may ensure that our house, office or place of entertainment is free from risk of fire accidents and that the necessary requirements of safe-keeping are complied with. From the above, it will be seen that Flamex PF is a product which must be in the possession of every one who desires to better the safety and protection of his textiles. By its special properties and versatility, together with its lasting application, Flamex PF brings peace of mind and guarantees that the fabrics being treated conform to the highest standards of safety. Do not wait until it is too late, but make a financial investment in Flamex PF and protect what is worthwhile.
Applicable Testing Standards:
This product has been through extensive testing. It passes all of these applicable standards:
- NFPA 255 (Standard Method of Surface Burning)
- NFPA 701 (Flame Propagation Testing)
- UL 723 (Standard for Test of Surface Burning Characteristics)
- CA Title 19 (California Code of Regulations
Conclusion:
In conclusion, Flamex PF is a must-have product for anyone looking to enhance the safety and protection of their textiles. With its advanced technology, versatility, and long-lasting protection, Flamex PF provides peace of mind and ensures that your fabrics meet the highest safety standards. Don’t wait until it’s too late—invest in Flamex PF today and protect what matters most.
FAQ’s
Is Flamex PF durable?
No, Flamex PF provides long-lasting protection for your fabrics until they are wet washed once or dry-cleaned more than twice.
Can I wash fabrics treated with Flamex PF?
No, if the treated fabric is washed, Flamex PF must be reapplied.
Is Flamex PF compatible with all types of fabrics?
No. Flamex PF is suitable for a wide range of porous and semi-porous fabrics only, and it’s always best to test it on a small, inconspicuous area first to ensure compatibility. Cannot be used on 100% silk, nylon, vinyl, and other non-porous fibers.
Does Flamex PF have a strong odor?
It has a slight ammonia odor when wet, which dissipates once dry
How long will the treatment last?
If the treated material and stored in a humidity controlled environment, and has not been washed or dry-cleaned, the treatment can last the lifetime of the material
How is Flamex PF applied?
- Make sure that the material has been washed or vacuumed to remove dust.
- Apply with a device that’s capable of spraying a thin liquid or by completely immersing it.
- When applying, start in the upper left corner and apply Flamex PF across from end to end.
- Continue working your way down and across while overlapping each pass.
- After treating one side of the material, confirm that the opposite side is damp.
- If the first side did not penetrate through, repeat the application to the opposite side, especially on thicker material.
- Eliminate any folds in order for air to dry the treatment thoroughly.
- Do not use on fully synthetic/non-porous textiles.
What Can Flamex PF Be Used On?
Flamex PF can be used on all types of fabrics and textiles, including:
- Garments
- Draperies
- Upholstered seating
- Furniture
- Curtains
- Bedding
So there you have it! Flamex PF is your ultimate ally in the fight against fabric fires. With its powerful formula and easy application, you can protect your fabrics with ease and ensure their safety.
Identifying Fabric Fibers:
You can learn about fabric content by doing basic burn tests. Take some threads from your fabric and put them in small dishes. Light them with a match. Watch how they burn and smell. Look at what’s left after burning. Check these results against the guide below. This test isn’t perfect but it helps identify different materials. Pay attention to how the threads react when they catch fire.
| FIBER | REACTION TO FLAME | ODOR | RESIDUE |
|---|---|---|---|
| Cotton | Ignites and burns with Orange-yellow flame | Burning paper | Grey Ash |
| Linen | Same as cotton | Burning paper | Grey Ash |
| Wool | Burns slowly with small Sizzling flame Usually self-extinguishing | Burning hair | Crisp, irregular, crushable black bead |
| Silk | Ignites sparking flame Usually self-extinguishing | Burning hair Not as pungent as wool | Crisp, round, black bead that is crushable |
| Rayon | Ignites readily Burns rapidly Sizzles slightly | Burning paper More pungent than cotton | Grayish-black ash |
| Acetate Triacetate | Ignites and sizzles Melts as it burns Has orange flame | Acid odor, like vinegar | Hard, irregular black bead |
| Nylon | Shrinks from heat; melts Bums with difficulty | Celery | Hard, round, gray or fawn-colored bead |
| Acrylic | Melts as it burns Fuses as flame is approached Bright sputtering flame Black smoke | Acid-like | Hard, irregular black bead |
| Polyester | Fuses and shrinks from flame Bums slowly; melting Self-extinguishing | Heavy pungent | Hard, brownish beige bead |
Fabric Flammability Chart:
How To Perform Fabric Field Burn Test?
You can do a basic fire test on fabrics in the field based on NFPA 701 rules. The test works by holding a flame to the fabric for 12 seconds. After that, the fabric needs to stop burning within 2 seconds. It should not burn more than 4 inches of material. Any drips that fall must put themselves out. This quick test only tells you if a fabric burns really badly. It does not prove the fabric will pass strict lab tests like NFPA 701. To be sure about fire safety, you need proper testing in a certified lab.
Additional Information:
Shelf life of up to 5 years when stored properly between 45-110° F. Leaves no nasty chemical odors does not release harmful fumes Will not affect the color or appearance of the treated material dries quickly without leaving any residue. Meets applicable standards – NFPA 255, NFPA 701, UL 723, and CA Title 19 1237.1 Materials treated with Flamex PF are non-toxic to humans and animals.
Disclaimer: Use the product as directed. If the product is proven to be defective, Sellers and Manufacturers will only replace the defective quantity. Neither Seller nor Manufacturer are liable for any injury, loss, or damage, direct or consequential, from the use of the product. The user is solely responsible for any risks and liability associated with the product. Any additional statements or recommendations not included in this agreement are not valid unless signed by officers of the Seller and Manufacturer. Coatings applied to interior finishes may deteriorate due to cleaning, atmospheric conditions, and other factors.
See more of our FR Sprays and Stain Additive Products
