As a business owner or facilities manager, you have worked hard to build a reputation for reliability, professionalism, and compliance. Protecting that reputation also means protecting the people, property, and operations that keep your business running.
Smoke detectors and alarms are essential, but they are only part of a comprehensive fire protection strategy. Passive fire protection—including properly specified fire retardant treatments and fire-resistive coatings—can help slow flame spread or protect structural components during a fire.
These products do not prevent every ignition or make combustible materials fireproof. When selected and applied correctly, however, they can support code compliance and complement alarms, sprinklers, and other fire safety measures.
This guide explains how fire retardant coatings work, where businesses use them, and what to consider before purchasing.
How Fire Retardant Coatings Work
Fire retardant coatings and treatments are formulated to alter how a material responds to heat and flame. Depending on their chemistry and intended application, they may slow combustion, limit the release of combustible gases, or create an insulating barrier.
Three common mechanisms help explain their performance.
1. Char Formation and Thermal Insulation
Some fire retardant treatments encourage wood, fabrics, and other combustible materials to form a protective carbon-rich char layer when exposed to heat. This layer can reduce heat transfer and slow the release of gases that fuel combustion.
Intumescent coatings provide insulation by expanding under heat to create a thicker protective char. Their performance depends on the coating system, substrate, application thickness, and exposure conditions.
2. Endothermic Cooling
Additives such as aluminum trihydrate and magnesium hydroxide absorb heat as they decompose. This process also releases water vapor, helping cool the material and dilute combustible gases.
These additives are used in certain plastics, composites, and coating formulations.
3. Gas-Phase Action
Some flame retardants interfere with the chemical reactions that sustain a flame. Others release gases that dilute combustible gases near the burning surface.
These are distinct effects, and a formulation may use more than one mechanism. Performance and environmental characteristics depend on the complete formulation—not simply whether a product is labeled halogenated or non-halogenated.
Common Applications for Commercial Properties
The right fire protection product depends on the material being treated and the required performance. A treatment intended for curtains is not interchangeable with a coating designed to protect structural steel.
Textiles and Draperies
Common settings: Hotels, theaters, schools, event venues, and places of assembly.
Curtains, drapes, and decorative fabrics may need to meet specific flame propagation requirements. NFPA 701 is a commonly referenced test standard for textiles and films, although the applicable requirements depend on local codes and the material’s use.
Treatments such as Flamex PF may be options for compatible absorbent textiles. Before selecting a product, confirm that the manufacturer’s documentation covers the fabric type and intended application.
Key considerations:
- Identify the fiber composition, including any synthetic blends.
- Check whether dyes, backing materials, or existing finishes affect absorption.
- Follow the specified application rate rather than relying on a general coverage estimate.
- Test an inconspicuous area for staining, texture changes, or other compatibility issues.
- Confirm whether washing, dry cleaning, or moisture exposure requires retreatment.
Upholstered furniture may be subject to different requirements. Passing a drapery test does not establish compliance for an entire upholstered item.
Wood and Interior Finishes
Common settings: Retail interiors, hospitality spaces, offices, theaters, and renovation projects.
Fire retardant treatments can help reduce surface flame spread on compatible wood products. Depending on the project, options may include penetrating treatments or intumescent coatings.
Penetrating treatments are generally suited to absorbent, unfinished surfaces. Coating systems may be appropriate where a painted finish is acceptable, provided the substrate preparation, primer, and finish are compatible with the tested system.
Products such as Flamex PF-1, Flamex PF-2, and Contego coatings should be evaluated against their specific technical documentation rather than treated as interchangeable solutions.
A critical distinction: A Class A surface-burning classification does not make wood noncombustible. It also does not automatically establish an hourly fire-resistance rating or qualify the wood as code-defined fire-retardant-treated wood.
Structural Steel
Common settings: Commercial buildings, industrial facilities, warehouses, and exposed-steel interiors.
Steel does not burn, but it can lose strength and stiffness at elevated temperatures. Intumescent fire-resistive coatings expand when heated, creating an insulating layer that slows the steel’s temperature rise.
Products such as Contego High Solids must be specified as part of an appropriate tested or listed system. An advertised one- or two-hour rating is not a universal property of the paint alone.
Required protection depends on factors such as:
- Steel member size and configuration.
- The required fire-resistance period.
- The applicable tested design.
- Specified dry-film thickness.
- Compatible primers and topcoats.
- Installation and inspection requirements.
High-solids formulations may reduce the number of coats needed in some applications, but actual labor savings depend on the specified thickness, application limits, and curing conditions.
Understanding Fire Safety Standards
Test documentation is essential when evaluating fire protection products. A statement such as “fire tested” is not enough; the report must be relevant to the material, application, and performance your project requires.
NFPA 701: Textiles and Films
NFPA 701 establishes test methods for assessing flame propagation in textiles and films.
For curtains and similar decorative materials, confirm which test method and local requirements apply. A treatment’s performance on one fabric does not guarantee the same result on a different fiber blend, fabric weight, or finish.
ASTM E84: Surface-Burning Characteristics
ASTM E84 measures surface-burning characteristics, including the Flame Spread Index and Smoke Developed Index.
Under commonly used building-code classifications, a Class A interior finish generally requires:
- Flame Spread Index: 0–25.
- Smoke Developed Index: No more than 450.
The classification applies to the tested material or system under the reported conditions. It is not an hourly fire-resistance rating.
ASTM E2768: Extended Surface-Burning Evaluation
ASTM E2768 evaluates surface-burning characteristics using a 30-minute tunnel test. It can be relevant where extended testing is required, including certain fire-retardant-treated wood evaluations.
It is not simply a test of whether a material reignites after exposure. Meeting the standard also does not, by itself, establish compliance with every requirement for a particular wood application.
Fire-Resistance Testing for Structural Protection
Where a project requires an hourly fire-resistance rating, look for the applicable tested or listed assembly or design, often based on standards such as ASTM E119 or UL 263.
Before purchasing: Confirm the required documentation with the project’s design professional and the authority having jurisdiction, such as the building official or fire marshal.
The Business Case for Fire Protective Coatings
Properly selected fire protective coatings can support risk management and help businesses address project-specific requirements. Their value depends on the building, the application, and the alternatives available.
Support for Life Safety and Asset Protection
Treatments that reduce flame spread or delay structural heating can contribute to a broader fire protection strategy. They do not replace safe electrical systems, housekeeping, evacuation planning, or required alarms and sprinklers.
Potential Retrofit Advantages
In some projects, an approved coating system may allow existing materials or exposed structural elements to remain in place. This can help preserve architectural features and reduce disruption.
However, coatings cannot automatically substitute for required construction materials or structural modifications. Any alternative must satisfy the applicable code and approval process.
Better Budgeting Through Complete Cost Comparisons
The price per gallon is only one part of the investment. Compare the total installed cost, including:
- Surface preparation.
- Primer and topcoat requirements.
- Application rate and required thickness.
- Labor, access equipment, and curing time.
- Inspection and documentation.
- Maintenance and potential reapplication.
A lower-priced product may not be the lower-cost option if it requires more material, additional preparation, or more frequent maintenance.
Environmental and Health Considerations
Environmental performance is an important purchasing consideration, but broad claims such as “green,” “non-toxic,” or “water-based” do not tell the whole story.
When evaluating a product, review:
- The current safety data sheet.
- Application and ventilation precautions.
- VOC and emissions information, where relevant.
- Restrictions for occupied spaces.
- Environmental exposure and disposal guidance.
- Any independently verified certifications.
Non-halogenated and bio-based formulations offer potential benefits, but neither description automatically establishes low toxicity or suitability for every use. Likewise, an indoor-air-quality certification does not establish fire performance.
No coating should be assumed to make smoke from a fire safe to breathe.
How to Choose the Right Fire Retardant Product
Use this checklist to narrow your options and avoid costly specification errors.
1. Identify the Substrate
Fabric: Determine the fiber content, fabric construction, backing, and existing finish. Some synthetic materials require specialized treatments or may not be suitable for topical treatment.
Wood: Identify the wood product and whether it is raw, sealed, stained, or painted. Existing finishes can prevent penetration or interfere with adhesion.
Steel: Identify the structural member and the required fire-resistance design before selecting the coating system.
2. Define the Required Performance
Are you trying to meet a textile flame propagation requirement, achieve an interior-finish classification, or provide an hourly structural fire-resistance rating?
These are different objectives requiring different evidence.
3. Consider the Exposure Conditions
Confirm whether the product is suitable for:
- Dry interior spaces.
- Humid or intermittently damp environments.
- Exterior weather exposure.
- Cleaning or repeated handling.
- Abrasion or other physical wear.
Do not assume an interior treatment will remain effective outdoors. For wildland–urban interface applications, verify the specific requirements for the material or assembly; a general flame-spread claim may not be sufficient.
4. Review Product-Specific Documentation
Request the current technical data sheet, safety data sheet, application instructions, and relevant test reports or listings.
Check that the documentation matches your substrate, application rate or thickness, and intended exposure conditions. “Tested to ASTM E84” identifies a test method—not the result achieved.
5. Plan for Inspection and Maintenance
Keep records of the product used, installation date, coverage or film thickness, and installer information. Establish maintenance procedures based on manufacturer guidance and local requirements.
Frequently Asked Questions
Are fire retardant coatings safe for occupied buildings?
Some products are intended for use in occupied-building applications, but suitability depends on the formulation and installation conditions. Review the safety data sheet and follow ventilation, protective equipment, curing, and reoccupancy guidance.
Avoid assuming that “water-based” means harmless or that a product prevents toxic smoke during a fire.
Can treated fabrics be washed?
It depends on the treatment. Washing, dry cleaning, or exposure to moisture may reduce or remove the effectiveness of some topical treatments.
Follow the manufacturer’s cleaning instructions and confirm whether retreatment or verification testing is needed afterward.
Do fire retardant products expire?
Liquid products have manufacturer-specified shelf lives and storage requirements. Once applied, treatment durability depends on the product, substrate, environment, cleaning, and wear.
There is no universal annual reapplication rule. Follow the applicable maintenance instructions and inspection requirements.
Will a treatment change the appearance of curtains or wood?
Some treatments are intended to preserve the original appearance, but results vary with the material and its existing finish. Possible changes include discoloration, residue, texture changes, or altered sheen.
Always test a representative sample before full application.
Does a Class A rating mean a material is fireproof?
No. Class A describes surface-burning performance under a specified test and classification system. It does not mean the material cannot ignite, will not burn, or provides an hourly fire-resistance rating.
Can a coating provide two hours of protection to any steel structure?
No. An hourly rating depends on the tested or listed design, steel member characteristics, coating thickness, and installation details. Select the system for the actual structure and required rating.
Protect Your Business With a Documented Fire Safety Strategy
Fire retardant treatments and fire-resistive coatings can play an important role in protecting commercial properties. The most effective approach starts with the right performance requirement, a compatible product, and documented installation—not a broad “fireproof” claim.
Whether you are treating stage curtains, specifying wood interior finishes, or protecting structural steel, verify the evidence and coordinate with the professionals responsible for approval.
To discuss product options and request application-specific documentation, contact National Fireproofing Supply Co. at (219) 926-1477.